R&G Racing DIY Moulded Ear Plugs

I found I have quite small ears so made 2 pairs with the mix, you would have to have massive ears to need it all for 1 pair, easy to make and step by step instructions, I've found it doesn't matter what I use it's quite noisy at motorway speeds but not wondering if it's my helmet not the plugs.

I have always struggled with standard plugs that are the same size as I have very different inner ear shapes/sizes! I was a bit dubious about how easy these would be to make/fit but I needn't have worried. As other people have said, I split the orange/white goo into four pieces which made the plugs the correct size for my ears. The whole making process took about an hour in total. I wore the plugs for the first time properly this weekend and they are great - easy enough to put in and remove and great at blocking vibration/engine/wind noise but I can still hear my husband through the comms. I wore them for about 7hrs in total yesterday alone and they were only just starting to get uncomfortable but all in all a really great pair of ear plugs!

Using less than recommended, but the same as other reviewers here. Relatively simple to make and shape. comfortable, but I found the in ear style plugs to be quieter. With a newer helmet, I would probably use these as they are so comfortable...next purchase I guess!

Really comfortable and a good reduction in noise. But do read the other reviews and take the advice to split the goo into 4 balls. Initially one of the plugs was still a little large and touched the helmet, but some careful surgery with a new razor blade sorted this. I've been using earplugs for 30+ years and theses are excellent.

Read on a previous review that you need to split into four equal balls and not three as the instructions say. As splitting into three you will have too much material. Therefore splitting into four I had enough to make too sets.
Out with the above the instructions are clear and simple to follow. Been wearing them a week now with two longe rides.

These work really well and would recommend block out more noise than the m3 disposable ear plugs- not scientifically proven but result of actual use. And further more they don't move about if you make em right.

Only negative is that once set the material could be a little less hard and more soft/rubbery. As if you don't seat right in the ear can result in pressure pain. Will probably get some more to experiment with. And the plastic holders for the materials, if this was a little bigger would make the perfect carry case, then no need for fabric bag thats not much use. Len.

Decent ear plugs, easy to do. Don't sit very nicely under the helmet though...use slightly less product than they suggest!

I've always struggled with getting a good deal on regular ear plugs but these fit perfectly every time. Easy to mould and they are a bright enough colour that I don't lose them when I'm getting ready in the dark. They also come with a little storage pouch which is handy.

1st set were to large in the ears when I put my helmet on. 2nd go I mixed less than the recommended quantity of the moulding solution to make smaller ear pieces. Much better for me. Excellent fit now

Tried this process for first time. For a more permanent earplug. The instructions are clear enough other than why you split into 3 pieces. I found out! The 1/3 plug was too large a piece for my little ear. Consequentially when i put on the helmet the earplugs became uncomfortable. I could have made two sets from the moulding material.

I picked a set of these up recently. The moulding process is easy and straight forward managed to get a really good fit with all of the plugs. Although they seemed to stop a lot of noise whilst sitting on the couch when actually used riding they performed worse than the cheap disposable foam plugs. I haven't thrown them out but I will not be using them unless I have no other choice.

Have made loads of purchases from Sportsbikeshop, all of which have been straight forward and hassle free, always very helpful. These earplugs were no exception, very comfortable, good value, good noise reduction, can hear my bike better with them in. Highly recommended.

Great product. You must follow the instructions to get a good fit, (apart from one bit. Read on). I bought a second batch as the first ones I created were not great, either in fit, sound isolation or comfort. The instructions tell you to split each cloloured mould into 3 balls. Split them into 4 balls. This means once you combine them, the overall mould is slightly smaller. But this allows you to create a much better seal, a more secure fit and better sound insulation. Now I've got them created, they are awesome. Perfectly comfortable, (I forget I'm wearing them), never fall out when I take my helmet off, and stay in place no matter how much I turn my head, move my jaw, etc. And of course sound isolation is great. Can still hear emergency vehicles, vehicle horns, etc, but no more ringing ears when I get home.

As always Sportsbikeshop we're a joy to deal with. The product arrived on time and was easy to mould and fit. Good and noticeable reduction in noise and comfortable to wear

Ear canal small. Normal plugs don't fit. These mould and fit into your ears. Had help putting them in from my partner and had so much gloop left we made her a set as well. I find them comfortable to wear and block out nearly all wind and most of the engine noise. Instructions easy to follow. A great product.

Couldn't get on with cheap foam plugs, tried several more expensive options, worried these would be difficult to get right - don't be put off, with someone to help it is really easy and they work well