R&G Racing Pro Radiator Guard - BMW F900 R/XR

The instructions were tricky to follow until you realise all that is required is to identify and loosen the screws (on the inside of the fairing) that hold the radiator plastic surround. Then you use the flat blade of a screwdriver to push up and loosen two plastic tabs on the bottom of the plastic radiator surround. Then gently pull the bottom of the surround away from the radiator just enough to permit the guard to be gently pushed into place on the front of the rad'r. Apart from the four rubber grommets I didn't need any other fixings to retain the guard in place. When the guard was fitted and the two tabs were pushed back into their slots, the guard was securely held by the plastic surround. The guard is well made with plenty of holes. Have ridden about 100 miles since fitting the guard with no problems.

Great service, as always from Sportsbike shop.
The product is a good aluminium protector, well-made & finished.
However, fitting instructions are vague to say the least (YouTube help required) and the means of attachment (4 plastic clips) just did not hold the new grill in place. I had to manufacture a solution with my own cable ties.
I'm still unsure whether I put the rubber grommets in the right way round....