Bike It Indicator Spacers

Brought these as I was replacing my indicators and the fit is good! Does what you need and easy to fit.

Fitted perfectly without any adjustment which from reading other reviews might be necessary. but then again did get the right ones for my bike as different options available.

Seems to do the trick.

Not a perfect fit on an xj6s, however that's not to say they wouldn't on other machines. Filing and trimming is not what I was after.

They're okay, they had to be adjusted a little bit to make them fit my '06 Hornet. They weren't an amazing fit but they were adequate for the price I suppose. They do the job.

Bought for my 2005 Yamaha R1, I had to file the outer edge to get them to fit in the recess on front fairing. They fitted the rear tail tidy OK. An absolute must if fitting the narrower diameter indicators which most are.

Really fast delivery and customer service spot on.

Good quality, perfect fit.

The spacers do exactly what you need them to, the chart to help find the right size for your bike is easy to navigate and match what you need for your bike. If you're thinking of sizing down your stock indicators for some tidy mini ones this is a must for your bike.

Perfect fit and does the job.

Bought for my FZ6 Fazer, have managed to make them work but they are slightly too big for the original holes.

The product it self is great, fills the blank and makes the new mini indicator look factory. The hole in the spacers however, did not line up with the either of the holes in my fairing, so I had to enlarge the original indicator whole to allow me to fit my new indicators. Once fitted though, everything looks spot on.

As I finally found the right ones I need for my Suzuki SV650S, 2002 reg. Found them easy to fit, made from good plastic, and with new arrow head indicators my bike looks totally different, comparing with the Shrek ears it had originally. Just one heads up, on my bike on front I've put 3 washers between those two plates of spacers, because you can over tighten the nut and bend/break back spacer.

The recommended set for a Y2K 929 Fireblade are sadly too small for the fairing holes. The spacers themselves are well moulded and would probably work well on other models.

Does exactly what they're meant to do. Filled the hole that the OEM indicators left, and now my universal indicators fit like a dream. Can't even tell that there are spacers there, they look like they were there from the beginning. Very impressed.