What size are the rawl bolts?

The rawl bolts go 65mm into the ground. You can find full dimensions/drawings on the Oxford website if that helps.

Oxford Task Force Ground & Wall Anchor Kit

Good value anchor

15 October 2024 by Paul

I bought this as it had a high security rating and good reviews. It's unobtrusive and was easy to fit if you use 5mm and 10mm drills before finally enlarging to 16mm. A large (in my càse Almax immobiliser) chain will fit through it.

Helpful?

Great value

08 September 2024 by John W

Great anchor although you do need to be very careful when drilling the holes. Recommend drilling 6mm and then 12mm pilot holes before using the 16mm bit. Minimal margin of error.
Solid unit and very handy fold down feature.

Helpful?

Solid

31 August 2024 by Steven D

Solid ground anchor.
I've paired this with an Oxford 14mm chain which fits great.
Comes with the fitting bolts.
You'll need an 16mm masonry bit and SDS drill to fit.
It's only got a small footprint too so sits neatly out of the way.
The loop does fold down too.

Helpful?

Brilliant

26 August 2024 by Anonymous

Great bit of kit, does what is says, easy to install

Helpful?

Oxford Ground Anchor

12 August 2024 by Tim B

Easy to install using 16MM drill into concrete garage floor. Fits my 16MM Oxford chain. Looks neat and nice that it folds flat.

Helpful?

Good anchor

11 July 2024 by Jon B

Second one as I changed my storage location, couldn't remove the old one, enough said I guess

Helpful?

Cracking kit

12 June 2024 by Anonymous

Used a 16mm SDS masonry bit and fixed it to our house wall to give me a secure temporary location for my bikes when they're not garaged. Making access easy and less excuses to go for a ride!
Very discreet but solid.

Helpful?

Almost perfect

28 April 2024 by PT

This is a good bit of kit and I have faith in it, but the wedge anchors to secure to the ground aren't brilliant - the taper which you actually screw into falls out easily.

You'll need a 16mm drill bit for these and it's not included (fair enough).

Make sure you have a good drill. I didn't have an SDS and was going into tarmac, but a decent hammer drill should do it. Just take your time.

Helpful?

Straight forward security

22 March 2024 by Michael O

Nice well made piece of kit straightforward to fit and use as a ground anchor.

Helpful?

Oxford Tast Force Ground/Wall Anchor

18 March 2024 by Daniel A

Very easy to install, feels really sturdy. Fits my Oxford Monster 16mm chain perfectly, would definitely recommend.

Helpful?

Small but mighty

17 November 2023 by Steve B

Much smaller than my other ground anchors, and all the better for it, especially as it doesn't protrude too high above ground. Ideal for one thick link chain, 13-16mm or two lesser chains.
Careful drilling required into concrete (16mm bit) as the holes are quite close together and there is no leeway for error!
Great SBS service as usual.

Helpful?

Recommended

06 November 2023 by Paul B

Compact and very strong. Folds down to avoid tripping. Works well if you follow the instructions for fitting. Make sure the holes for the rawl bolts are deep enough and you get all the concrete dust out. I used a piece of thin plastic tubing to blow air down the hole with,.

Helpful?

Ground Anchor

19 July 2023 by Anonymous