Will these fit a 2016 Suzuki GSX 1250 FA?

Unfortunately, this item will not fit your motorcycle, apologies.

Barkbusters Storm Handguards - Bar End Mount

Effective protection

28 September 2024 by Anonymous

Fitted to my '22 Duke 790. I had to "adjust" the brake side to clear the lever by bending the supporting bracket and use some 3m foam tape but once on they look fine and keep rain and wind off your hands. With some heated grips they work very well.

Helpful?

Barkbuster handguards

15 December 2023 by Anonymous

As usual, fast efficient service, best price

Helpful?

Great handguards

11 September 2023 by Paul C

Purchased these to replace broken ones on a Burgman 400 I acquired.
Better fitting than the old ones which used expanding rubber in the hollow handlebars whereas these are expanding metal fittings, much better.
SBS did a price match for me, so I got the best price.

Helpful?

Ok but should have gone for the full mount

21 June 2023 by Lee W

For CB500x 2016..Good product in general, and superb quality. Unfortunately my internal bar weights were a bit spinny so could only fasten the guards so tight. Also, end weights have a cam than locates the weight to the internal one so with without the weight the guard mounts are wonky. Unfortunately, the bolts provided in the kit aren't long enough to use with the weights. So in the end bought a longer set of bolts from eBay and finally sorted. Next time I will buy the full bark buster as the end mount was just too faffy in this particular use case.

Helpful?

Ace very good

13 June 2023 by Anthony B

Easy to fit, keep hands out the wind and dry in light rain

Helpful?

Who you gonna call Barkbusters

05 March 2023 by Keith Y

These are particularly good with thick plastic guards and a strong metal frame that fixes to the bar end. I had a problem in that my bike (Kawasaki) has a nut fixed in the bar end. A small amount of surgery needed to remove it. So check you handlebars before you order and get the correct fixing.

Helpful?

Adds looks, and good to go next winter

31 May 2022 by Steve B

Fitted these to my Kawasaki Vulcan S, couldn't be simpler - direct replacement for bar ends using the specified option. 2 allens each side and a couple of screws, all provided. Angle simple trial and error. Solid and add looks to my black bike. Wind now not an issue and with heated grips good to go next winter.

Helpful?

Properly engineered

14 April 2022 by Kim G