Denali Plug-N-Play Wiring Kit for Denali SoundBomb Horn

Easy to install on my Tiger 1200.

Makes fitting the sound bomb horn so much easer plenty of wire, Great bit of kit.

It makes wiring in the Sound Bomb horn a breeze, but you will likely end up having excess loom to hide. Making your own loom would be neater but you need to be confident in making up the needed wiring. This uses the standard horn connectors, so you can always move the Soundbomb to your new bike and reinstate the original horn

The level of service from the sports bike shop remains high with the easy to navigate website, informative description and easy & smooth ordering. Product delivered next day having paid for express delivery.
I bought the sound bomb horn elsewhere and assured what was in the box was all that was needed. WRONG , this lead is essential unless you are a qualified electrical engineer. Once with the lead installed within a few minutes, literally plug in and play….and the horn is super loud and I now feel so much safer I can alert car users to my presence. Great bit of kit.

All the right bits. Possibly too much cable for a Tracer 7 but better that than not enough IMHO

Great piece of kit saved me loads of time not having to figure out how to do it.
With a harness and instructions it was a piece of cake.
The Quality was excellent.
The price was what I would expect for a professional bit of kit.
Thank you. James

Great bit of kit supplied really quickly even in these difficult times.
Pity you do not stock the necessary relay which had to be ordered from Denali direct

Wiring harness is well made and so easy to fit even a complete novice could do it, down side you have to supply your own relay otherwise top notch item.

Excellent value well-made and instructions very easy to follow are spot on for installation. Peace of mind you can install this wiring kit knowing its safe and less chance you are not going to wire incorrectly. Having the relay connection and inline fuse within the harness and well insulated would highly recommend this installation harness.

Very easy to connect leaving aside the different colours description on the instructions. I had black/white & black/yellow on the original horn so I used yellow as guidance and connected it to Denali yellow (red in manual). Correctly done.

Compressor and horn were surprisingly difficult to fit (Kawasaki Ninja 1000SX) due to lack of space anywhere hidden. I fabricated two brackets for each but if the manufacturer sells bike specific brackets, it will be much easier to go that way.

Otherwise very good product.

This is my second kit for denali horn, previous was installed on previous bike. Quality is top notch.

Easy to install and no need to change existing wiring, if I were to do it again I would order the brackets also as the split bomb wasn't the easiest to install on my r125 due to space limitations

It is possible to wire your own relay controlled accessories without this kit so it makes this an expensive option (hence the 4stars)
That said it makes the job a lot easier and gives a very professional finish. Used this to fit a sound bomb horn to the bike (also purchased from sportsbikeshop.Co.uk) plenty of wire- had to cut it down to get a professional looking finish. As always great service from sportsbikeshop.Co.uk- even shopping around, still the cheapest and next day delivery

Good quality
Very easy to fit you will need to remove panels to hide the loom
I have used these on 4 different makes of bike and had no issues with the length of the loom

Great bit of kit allowing you to connect the sound bomb to your bike and if you wish keep stock horn too. So easy to install even a woman can do it (haha I am one so I can say that) ;) Fast delivery no fuss and cheapest price found online even beat eBay ! Cheers sportsbikeshop.co.uk