R&G Racing Fork Protectors - Honda CBR1000RR Fireblade / SP
Ultimate protection for your forks
Details
Select an option
Get a price match
Verified Customer Reviews for R&G Racing Fork Protectors
Very easy to install, clear instructions. Doesn't draw the eye too much, and hopefully won't have to test them out, but I'm sure they will do the job just fine. Nice snug fit, and a small peace of mind knowing they're there.
R&G Racing Fork Protectors - Honda CBR1000RR Fireblade / SP
Easy to install, they help to eliminate damage to the front forks, fork bottoms and brake callipers during a crash or drop.
Fitting Instructions
- Easy to fit
- Protects fork legs
- Authentic factory look
- Protects callipers
- Damage limitation in the event of a drop
Questions and Answers
Do you have to drill the bolt in the front axle
December 4, 2017The fitting instructions for the CBR1000RR and SP 2014 on are below - Remove spindle nut and replace with new one supplied in kit(H0003) Place the ring type spacer (S0396) over the hexagon of the replacement spindle nut just fitted. Fit one nut and washer on spindle-bar (end with shortest thread). Feed spindle-bar with nut and washer through the crash protector (B0442 M8)and into the front wheel spindle from the right hand side so nut goes into recess as shown above. Place the remaining stepped spacer over the exposed thread on the left hand side so it locates into the spindle. Place remaining crash protector over exposed end of spindle-bar. Fit washer and nut from kit onto thread and tighten until both nuts are engaged in nylon and equal amounts protrude from either side. Do not over tighten the nyloc nuts will hold it tight.
You may also like...
You won’t get it cheaper. Our Price Match Promise.
Find it cheaper at any major motorcycle accessory retailer, online or in-store and we‘ll match it.
How to request a price match.