Select an option
Get a price match
Verified Customer Reviews for Kriega Haul Loop
Kriega top quality products at sensible money that will last and on another level to the similar products available.
Might even pull a Landcruiser out if fitted correctly!!
My bike doesn't have a grab handle amd wanted something to help me move it. This has done just the trick. I have secured it to the frame under the seat and the seat can still be removed without taking this off. It is extremely secure.
Kriega is fantastic quality no matter the product. THese haul loops are a must if you are verturing off roads as at some pint you will be looking for a comforable grab pointt to drag your bike out of the muck!
Quality strap from Kriega. Easy to install. Essential for somewhere to grab when hauling the bike up/out.
Bit more expensive than alternatives but this is seriously well made and can be fitted securely without stripping down the front end of bike. Does require 2 cable ties which are not included by Kriega (I've deducted a point for this as could easily be provided in the packet) so best watch installation video before fitting.
How good can a strap like this possibly be? Well, this one's unexpectedly sturdy in its construction and fits really securely, but also easily. I've come to expect great quality from Kriega, but this one has exceeded expectations so far and will save people's hands getting stuck between the spokes of my front wheel next time I find myself in an embarrassing situation. Top marks.
Kriega Haul Loop - Front
- Semi-rigid design
- Ultra tough design
- Hypalon abrasion resistant re-enforcement
- Toughtek to grip wet or dry
- Stainless steel buckles
- 10 year guarantee
To fit the Kriega haul loops follow the procedure below;
Undo the web on the buckles. Wrap the web around the fork leg, directly under the lower triple-clamp. Re-thread the buckles (making sure to feed the web back through the buckle to 'lock' it off). The loose end can be placed under the elastic-loop provided. To prevent the Kriega Haul Loop moving down the fork leg's you need to use a cable tie in either two ways. The first method is to feed the cable tie through the small web-loop next to the buckle. Connect the cable tie and tighten around the fork leg directly above the lower triple-clamp.
Another method is to use two cable ties linked together in a figure of eight behind the front light/number plastic. The figure of eight methods is a superior one, as you can fine tune the angle of the Haul Loop by decreasing the length of the cable ties. The shorter the tie the more elevated the Haul Loop will sit.
Installation Guide
Questions and Answers
You may also like...
You won’t get it cheaper. Our Price Match Promise.
Find it cheaper at any major motorcycle accessory retailer, online or in-store and we‘ll match it.
How to request a price match.