Givi SR1142 Rear Rack - Honda CB125 F 2015

As others have said, the bolt holes don't line up. As some have had good experiences, or managed to do it by correctly not tightening bolts until all are in and then going across diagonals, perhaps there's variability, I suspect some of the issue comes from the welding between the plates and the bars being out of alignment, but I had to open out all the holes by 1mm to give enough tolerance for it to fit. Once fitted, it seems stable and strong enough.

I love it was easy to fit and looks good staff are very nice and there to help if needed

Fit my CB125F perfectly. Rack is now mounted and it works a treat!

I spent ages trying to decide which rack to get for my 2020 CB125F, I had seen people say one of the holes doesn't align but all you need to do is put all the bolts in loosely before tightening. We used the bolts that had been used for the original handrail. Did not put the helmet hook back on as that wouldn't fit but isn't necessary having a back box now. Easily able to fit a non-brand backbox to the rack. Would recommend and was the best price around when I purchased.

Quick response from support team regarding payment issues and got delivered swiftly especially during this pandemic. Thanks!

The rack is solid and well made. Just remove the garb handle and fit the rack. I did have a slight issue with the holes lining up as many others have said, but with a bit of wiggling got it to fit. Givi could do to adjust their jigs to get a better fit though.

easy for a diyer to fit can't wait to fit the top box

Rack is made very well but only 3 of the bolts align perfectly and the 4th bolt is hard to get in and requires a mix of force and wiggling the rack.

Well built, works for me. Easy to fit, but don't screw down the bolts completely one at a time, instead start them all off then work round turning each a little bit until they're in. Otherwise manufacturing tolerances on bike and rack mean it might be hard to get the last one to start of at all.

Easy fit but as with all aftermarket items like this there is always one hole just slightly off centre causing a misalignment. Felt the bolt thread was not picking up cleanly and required a die to clean up the bolt before backing all 3 bolts off more to get the last one aligned. Other than that a nice fit once tightened.

Great product that is a doddle to fit, just 4 bolts and the rack is fitted and secure to put on a top box.

An essential piece of kit that has allowed me to go completely rucksack free. If you have a basic grasp of DIY and a screw driver you will face no issues installing this item. The original factory fitted rack will need to come off first. A solid ratchet set highly recommended to unloosen the nuts, that will allow you to place the this product on. The rack fits perfectly, required a little shuffling when lining up the nut holes after that it was plain sailing.

The instruction's provided are sufficient to competently place the plate on the rack and then fit the box on top.

Rack fitted bike like a glove, no issues with any of it. Top marks.

Unfortunately, the holes for the screws do not align properly on the bike. I could only get 3 of the 4 screws in. It is still sturdy enough with only 3 screws. However, it really shouldn't be that difficult for them to get it right and I'd expect more from a new product.

Very pleased with the products and delivery service. Only shortcoming was, I needed to add a further 4 rubber washers to get the box to fit the rack. Also the lower bolt nuts may work themselves loose with time/vibration. Surprised the bolts are not locked from the top side only.