Givi SRA6401 Monokey Aluminium Adaptor Plate - Triumph Tiger 800 XC

Great looking sturdy product ... usual poor fitting instructions from Givi. Research on line found Polish you tube video helped greatly.
Good price would buy again

Wiped down all components with ACF-50, FITTED IN LESS THAN AN HOUR.
Job done.
Even time left for a ride before she notices I'm not in the shed :)

Very resistant excellent quality support and I only had a problem with the installation because the elongators that came were too long and I had to cut as I have tools for this was easy but for someone who doesn't have it maybe a little difficult, and I think it should seeing in the package a paper mold for the hurricane I found this part difficult as well but the production once installed is excellent super recommended

Excellent quality product from Givi that looks great on the bike and holds my Givi Trekker top box securely, which is what it's supposed to do! The rack is sturdy and solidly mounted, and as I've said I think it looks great.

As others have experienced, the pre-marked drill locations on the plastic OEM luggage rack don't align with the mounting points, so be very careful to double check where your holes need to be before drilling!

Bought this for my new bike, despite me ordering the wrong one, entirely my mistake, the sportsbike shop arranged & paid for a courier to collect it & redelivered the correct one. Brilliant service as always

Followed a few online forums & videos before I fitted this to my 2019 tiger 800 xrt. So glad I done this first as it made it a doddle to fit after. The template positions on the underside of the Triumph plastic cover are well out. DO NOT GO BY THESE !!! Once you have this sorted it was a simple job to do. If you have the expedition pannier rack, you will have to change the 70mm M6 bolt in the kit to a 90/100mm bolt. Looks superb and very sturdy when fitted, well pleased with it. Again, Sportsbikeshop at the top of their game with a very quick delivery

A great product as you'd always expect from Givi, which is fairly straightforward to fit. (just make sure you double check where to drill the holes as followed the instructions from a well known, reviewer on YouTube and they were slightly out.) As my Tiger already had the factory fitted Pannier racks,, I had to source two Hex M8 90mm bolts, which are not supplied with top box rack. I assume if you have purchased the side pannier racks from Givi, these bolts were probably supplied, as per the fitting instructions. Once again great customer service from Sportsbikeshop

Sportsbikeshop service fast and excellent as usual.

The plate is solidly made and looks good on the bike now it is finally mounted. The fitting instructions are terrible though. The internal brackets are easy enough to work out and fit but the holes for the final mounting shown on the diagram don't correspond to the holes that actually fit the brackets! It took me ages to work out. I almost gave up and returned it.

If you have the triumph pannier racks fitted, you will need to source some 100 mm bolts for the brackets as the supplied 75mm will not be long enough, but that is a minor issue,.

Excellent piece of kit - does what it says and looks good. Feels solid and 2x Large Givi boxes both a firm fit. Plenty of attachment points for when Soft Luggage used.
Tiger 800 - Triumph Pannier racks mean additional 2x 90mm M8 bolt needed. In my case Drill holes matched injection points under cover - reasonably acccurate but a round file helps!

Comes with full fitting kit. Brackets and bolts , I fitted this to my tiger 800 xrt. You will have to drill 4 holes in the original plastic cover plate to fit the spacers. So you will need a 17 mm hole bit. If you have triumph pannier racks you will also need 2 longer M8 bolts. As the ones supplied with the kit are not long enough to pass through the pannier frames and new brackets.

Top quality givi product as expected, makes the bike look much better when the topcase isn't on.
Usual five star service from Sportsbikeshop

Wow what a product, very good quality, could have had better instructions but muddled through, excellent and a great fit for my Givi top box!!! Looks and feels superb

Quality piece of kit. Easy to fit once you do a bit of research on where to drill the holes for the Triumph plastic tray. Surely a template is a no-brainer from the manufacturer??

Once on, the Dolomiti top box fits perfectly.

Great service and delivery from Sportsbikeshop as usual.

Rapid delivery, well packaged, great comms - and the perfect addition to my Triumph Tiger

Good service, fast delivery.

The plate itself is well built.

Be aware its not plug and play it requires drilling the plastic cover to run the screws that hold the plate to 17MM.